• in , ,

    Cheapest Dual Band Wireless-AC (802ac) Router from TP-Link – AC750 2017

    Archer C20 TP LInk AC750

    Recently I purchased the new, award-winning budgetTP-Link C20 AC750 Dual Band Wi-Fi Router and it was pretty much needed. I don’t know why I didn’t upgrade it earlier. Anyways, I got this during a lightning deal on Amazon for just Rs.1399 ($21 USD) and I am really happy with my Wi-Fi router upgraded with Dual Band “ac” Standard. If you don’t know what dual-band Wi-Fi is, check your Android device, most of you use smartphones with Dual-Band Wi-Fi receiver and you can choose between 2.4Ghz and 5 GHz band in advance Wi-Fi settings or let your smartphone switch between bands automatically.Archer C20 TP LInk AC750

    What is Dual Band Wi-Fi?

    Dual Band WiFi or 802.11ac is the Next Generation of Wi-Fi. AC was introduced in 2013 and since then it has achieved a lot of popularity. Wireless-AC can transmit data at rates more than 6x than the best Wireless-N devices out in the market. You can say that 802.11ac is a supercharged version of 802.11n. Wireless-AC delivers speeds ranging from 433 Mbps (megabits per second) up to several gigabits per second. To achieve this, 802.11ac works exclusively in the 5GHz band, uses plenty of bandwidth and operates in up to 8 spatial streams (MIMO), and employs a kind of technology called beamforming that sends the signal directly to client devices.

    Who needs a Wireless-AC Router?

    Anyone who has an internet connection with a speed greater than or around 50Mbps requires the Wireless-AC router. I have a 75Mbps Unlimited 1:1 Plan and believe me, I am really enjoying my Wireless devices like FireTV, Smartphone, My Laptop etc. Speed has increased significantly.

    If you use a device like Chromecast 2 or FireTV stick, a DualBand Wireless AC router is a must. Both devices support Dual Band. FireTV comes with Bluetooth 4.1 and it’s remote is also connected Wirelessly via the 2.4GHz band. So if you use it with Bluetooth, you will experience frequent disconnections with your Bluetooth paired device as a lot of data transfer is taking place on the same frequency which gets affected and causes interference, it’s really annoying. FireTV is the main reason why I upgraded my Wireless N Router with Wireless-AC Router.

    Why Should You Upgrade to a Wireless-AC Router?

    If you reached here, you probably know enough about Wireless-AC router. Still, here are few more reasons to buy a Wireless-AC router, particularly TP-LINK C20 AC750.

    With Wireless-AC more devices can connect instantly to a single router, with less interference or disruptions. The 2.4GHz band is affected by signal interference from cordless phones, Bluetooth headsets/keyboards, baby monitors, neighboring wireless networks, remote door openers, and even microwaves, etc. But the 5 GHz band rises above all interferences and gives you uninterrupted data transfer speed.

    TP-LINK C20 AC750 Features:

    TP-Link’s Archer C20 comes with the next generation Wi-Fi standard – 802.11AC. It’s also backward compatible with 802.11N and is 3 times faster than wireless N speeds with higher power efficiency and robust security. It’s also IPv6 ready.

    Archer C20 TP LInk AC750 Ports Unboxing

    Archer C20 also offers you the flexibility of two dedicated networks and ensures amazing wireless performance. It can deliver data at the rate of 733mbps, 433mbps wireless speeds over the crystal clear 5GHz band and 300mbps over the 2.4GHz band. Simple tasks such as sending e-mails or web browsing can be handled by the 2.4GHz band while bandwidth intensive tasks like online gaming or HD video streaming can be processed by the 5GHz band – all at the same time.

    Archer C20 TP LInk AC750 Ports

    The stable omnidirectional signal and superior coverage with 3 fixed external high-quality antennas,  you can experience excellent wireless performance with the stable signal in every direction and high speed across greater distances. However, the 5GHz band covers less area than 2.4GHz. So you can get coverage and reliability from anywhere in your large home or office.

    Archer C20 TP LInk AC750 Ports BOX

    Buy Now from Amazon.in and Amazon.comThe best feature of TP-LINK AC750 Dual Band router, that I liked the most, is the ability to control router with your Android or iOS device. You can set up the Archer C20 AC750 in minutes thanks to its intuitive web interface and the powerful Tether app. Tether also lets you manage its network settings from any Android or iOS device, including parental controls and access control.TP-Link Tether - Android Apps on Google Play

    TP-Link C20 AC750 2017 Specifications

    Interface 4 10/100Mbps LAN ports
    1 10/100Mbps WAN port
    Button WPS/Wi-Fi Button
    Reset Button
    Power On/Off Button
    Antenna 2 × 2.4GHz Antennas
    1 × 5GHz Antenna
    External Power Supply 9V/0.6A(EU), 9V/0.85A(US)
    Dimensions ( W x D x H ) 9.1 x 5.7 x 1.4 in. (230 x 144 x 35mm)
    Wireless Standards IEEE 802.11ac/n/a 5GHz
    IEEE 802.11b/g/n 2.4GHz
    Frequency 2.4GHz and 5GHz
    Signal Rate 5GHz: Up to 433Mbps
    2.4GHz: Up to 300Mbps
    Reception Sensitivity 5GHz:
    11a 54M: -76dBm; 11ac VHT20 MCS8: -71dBm;
    11ac VHT40 MCS9: -66dBm; 11ac VHT80 MCS9:
    11g 54M: -76dBm11n; HT20 MCS7: -73dBm;
    11n HT40 MCS7: -71dBm
    Wireless Functions Enable/Disable Wireless Radio, WDS Bridge, WMM, Wireless Statistics
    Wireless Security 64/128-bit WEP,WPA / WPA2,WPA-PSK/ WPA2-PSK encryption
    Transmission Power CE:
    Quality of Service WMM, Bandwidth Control
    Management Access Control
    Local Management
    Remote Management
    Port Forwarding Virtual Server, Port Triggering, UPnP, DMZ
    Dynamic DNS DynDns, Comexe, NO-IP
    VPN Pass-Through PPTP, L2TP, IPSec
    Access Control Parental Control, Local Management
    Control, Host List,
    Access Schedule, Rule Management
    Firewall Security DoS, SPI Firewall, IP Address Filter/Domain Filter, IP and MAC Address Binding
    Protocols Supports IPv4 and IPv6
    Guest Network 2.4GHz guest network × 1
    5GHz guest network × 1
    Certification CE, RoHS
    Package Contents AC750 Wireless Dual Band Router Archer C20
    Power Adapter
    RJ45 Ethernet Cable
    Quick Installation Guide
    Box Dimensions (W X D X H) 14 x 8.8 x 2.7 in. (357x223x68mm)
    System Requirements Microsoft Windows XP/Vista/7/8/8.1/10, MAC OS, UNIX or Linux
    Internet Explorer, Firefox, Chrome, Safari or other Java-enabled browsers
    Cable or DSL or Fiber Modem/Terminal
    Subscription with an Internet Service Provider (for Internet access)

    Buy TP-LINK C20 AC750 Wireless Router Now.

    Other Budget Wireless-AC (Dual-Band) Routers you can Buy:

    If your Laptop or PC doesn’t have a Dual-Band Wi-Fi receiver, you may use D-Link DWA-171 Wireless AC Dual-Band Nano USB Adapter to achieve this.


    It’s almost end of 2017 and this is the age of streaming media and online gaming. So Wireless-AC is not just a luxury, it is the networking standard you all need and deserve. So get one for you, either this TP-LINK Archer C20 AC750 or any other. Since this is the cheapest one, i recommend you to go for it without any doubt.

  • in , ,

    35 Amazing and Awesome Tasker Profiles every User Should Know


    What is Tasker and Tasker profiles?

    Tasker is basically an automation app which is available for Android devices to automate most of the tasks. Using Tasker, one can create a list of actions, called a task, which can then be executed according to a variety of conditions you set. Think of IFTTT app where you tell IFTTT that you want it to do task A, B, and C when X happens. But it can do a lot more than what IFTTT does. Tasker offers a huge variety of both services and plugins. Also, Tasker can do more complex tasks on the Android devices.

    You can perform basic tasks such as turning ON Wi-Fi or Bluetooth and a complex task like, for example, Quickly Log in to your Windows PC using Fingerprint Sensor of your Android phone.35 Awesome and Amazing Tasker Profile

    1. Turn On Battery Saving Mode When You Have Low Battery

    Using this profile, you can save some of your battery juice when you are running low on battery charge.

    1. Go to the profile. Select State.
    2. Next select Power option followed by Battery Level.
    3. Now you need to choose the battery range as to when to enable this profile. Let us say we keep the range as 0-5.
    4. Now to create a new task, tap on the “+” icon. Then select Net and turn your Bluetooth, auto-sync, mobile data, Wi-Fi off.

    This method might come handy when you are expecting some important calls while being on low battery.

    2. Device Sleep Timer

    It mostly happens with many of us that while laying down in bed and listening to some peaceful music we fall into deep sleep, only to keep the songs keep on playing on your phone. Well, Tasker profiles offer a solution for this. Using this pattern, you can stop the song or any other audio playback after some particular time.

    1. Create a new task and press the “+” button.
    2. Go to Media section.
    3. In media, go to Media Controls and go to cmd.
    4. Under cmd, select option stop.
    5. Now, we want to halt the song playback so we will choose the grid type square icon near the bottom right corner which is the music app.
    6. Next step is to go to the menu of Tasker and look for the icon Task timer and drag that widget to your home screen.
    7. Upon being asked by the widget to link it to a task, select the sleep timer job created in the first step.

    3. Night Mode

    Trying to have a quiet, peaceful sleep at night but the non-stop messages and notifications from phone keep disturbing you? Well, this task profile activates the Silent mode on the phone at night, along with turning the Wi-Fi off and deactivating them in the morning.

    1. Go to Profiles.
    2. Click on “+” sign.
    3. Select the time limit for your night mode. For example, 24:00 to 07:00.
    4. Add a new task and click on “+” icon.
    5. Search for Audio and go to silent mode and turn it on.
    6. Go to the created task again, and click on the net and turn off Auto-sync and Wi-Fi.

    Now finally you can every day have a good sleep free from disturbances.

    4. Keep The Screen On While Reading Any e-Book

    Having to keep tapping on the phone screen continuously while reading an e-Book to maintain the display light from going off can be very irritating. With the help of Tasked, you can set an automated profile for keeping the screen light on every time you read an e-Book in your phone.

    1. Go tho profile and then navigate to Application.
    2. Select which all e-Book reader app you want to add under this category.
    3. Add new task.
    4. Click on “+” icon.
    5. Go to Display then Display time-out.
    6. Next step is to increase the Display time-out limit according to your desire.

    5. Turn Phone Upside Down to Keep Your Phone in Silent Mode

    While sitting in class or attending some important meeting sometimes suddenly our phone rings up this causing disturbance. To avoid such situations, you can simply use this Tasker profile and just turn your phone upside down to stop it from ringing.

    1. Navigate to Profile and select state.
    2. Then, head towards Sensor and select Orientation.
    3. Under Orientation, a menu will appear from which you need to select Face down.
    4. Now, create a New Task. And, click on the “+” icon.
    5. Then go to Audio and click on silent mode.
    6. To stop the phone from ringing select vibrate.

    Next time onward, in situations where you don’t intend your phone to ring up, just turn your phone upside down.

    6. Launch Apps Serially

    We all have a serial of using apps followed by another app. Every time we have to go to menu page of our phone and open the apps. Using these steps, this process can be made easier as one app after another will start opening themselves automatically.

    • Go to profiles, then navigate to “Application.”
    • Here select the app that you want to open first, or you usually do open first.
    • Create a new task and click on “+” icon.
    • Click “App” and select “Launch App.”
    • Now choose the second app that you want to open right after the first app.
    • Long press on the second app and click on the option “Move To exit.”
    • Next time your apps will open up serially for you.

    7. Play Music When Headphones Are Plugged

    With this profile, you need not manually open your music playlist when you plug in headphones.

    • Go to profile and select “State.”
    • Next step, go to “Hardware” and click on “headset plugged” then tap on “Any.”
    • Create a new task and tap on the “+” icon.
    • Click on “App” and select on “Launch App.”
    • Click on your music player app.
    • Now every time you plug in your headphones, your playlist will play automatically.

    8. Shake Your Phone to Turn on Flash Light

    • Download Tesla LED flashlight.
    • Go to “Profile” in Tasker and click on “Event.”
    • After that press “sensor” and click on “Shake.”
    • Now choose your preference for axis, sensitivity, and duration.
    • Create a new task and tap on “+” icon.
    • Click on “Display” and tap on “System Lock.”

    This might be handy when the light goes off instantly and suddenly.

    9. Send an Emergency Text

    Sometimes when you are running on low battery, and you think of sending a text of urgency before your phone goes dead, this automated task profile might help.

    • Create a profile.
    • Go to “State” and then tap on “Power“.
    • Select the battery level between 0-5%.
    • Create a new task and tap the “+” icon.
    • Navigate to the “Phone ” and press “Send SMS.”
    • Now just enter the Phone number and type the message.

    So next time whenever you are running low, and battery and your phone are about to be dead then automatically an emergency text will be sent to that particular number.

    10. Turn On Auto-Rotate When You Open Some Apps

    Some apps work better on the landscape mode like YouTube videos.

    • Create a new profile and select an application.
    • Choose an application that when being opened the Auto-Rotation should be turned on.
    • Create a new task and tap the “+” icon.
    • Tap on “Display.”
    • Set “Display Auto-rotate” to ON.

    Now, whenever you watch a YouTube video; the screen will automatically turn to landscape mode so you can enjoy watching your video correctly.

    11. Read Out SMS While You are Driving

    Looking at the phone while driving might lead to some serious accidental hazard. So this profile helps you read the SMS’s out loud for you.

    • Go to “event” and click on “Phone” section and hit “Received SMS.”
    • Now, press “Application” and click on “home” or “Car.”
    • Create a new task and press on the “+” icon.
    • Hit “Misc” button and click on, “say.”
    • Then enter “SMS from %SMSRF: %SMSRB.”

    So from now on, no need to look at your phone to read texts and put yourself in harm’s way.

    12. Find The Exact Location Where You Parked Your Car In The Parking Lot

    A long row of cars parked in a parking lot, and too many of them look familiar, and in such situations, it might become difficult for you to find out where exactly is it parked.

    • Go to your phone home screen and press and hold it little longer.
    • A menu will pop-up, and from that, you need to select “Task.”
    • Press the “New” button in the upper-right corner.
    • Give a name to the widget that will save your location and also give the “One Time” option.
    • Create a new task and tap on “+” option.
    • Go to Misc and search for GPS and set it on.
    • Go to “Applications,” open “map.”
    • Go to the mode and select navigate. Provide the latitude-longitude.

    This might be helpful when your car is in a packed parking lot, or on an unfamiliar side street.

    13. Decrease Your Phone’s Brightness In The Morning

    Waking up in the morning and suddenly facing high brightness of your phone, that’s going to hurt much. So here’s a solution to this problem.

    • Open Tasker and go to “context” and then go to “Time.”
    • Now set a time in the morning before you wake up.
    • Create a new task and tap on “+” option.
    • Go to “Display” and tap on Display Brightness and set it at level 0.
    • Hit the green check button when you’re done.

    In the Task Editor window, you can click on the Play button in the bottom right to preview the task. Then just press the green check button to save your job.

    14. Notify When the Battery Is Charged

    Overcharging your phone’s battery can highly affect its lifetime. Moreover, sometimes we keep our phone plugged into the charger at night and somehow fall asleep and forget to plug it out when battery fills up. Tasker provides a solution for that.

    • Go to “Profile” and select “Event.”
    • Click on “Power” and hit on “Battery Full.”
    • Now just adjust the Battery limit priority according to your comfort. For example, you might adjust the priority as ‘less than 30% and higher than 80%’.
    • Now create a new task & hit on the “+” icon.
    • Click on “Alert” and tap on “Notify Sound.”
    • Type “Disconnect your charger.”

    15. Lock Your Applications

    Why unnecessarily install another app for just locking your apps when you can have Tasker do it for you! Listed below, are the steps to do that.

    • Go to the “Profile” section and click on “+” sign.
    • Go to “Application” and select all the applications you want to lock.
    • Now create a new task & click on the “+” icon.
    • Navigate to “Display” and hit the “Lock” button.
    • Now set your desired password for securing all applications.

    16. Turn On Wi-Fi At Home

    Most of us usually prefer using Wi-Fi at home but when we once leave home we most likely change to our Mobile data connection as it is not possible to get Wi-Fi signal everywhere. Tasker helps in automating this process.

    • Go to your GPS and turn it on.
    • Go to the place in your home where your Wi-Fi router is located.
    • Now open Tasker and navigate to “Profile” and choose “Wi-Fi at home.”
    • Head to “Location” and do your Net on and your GPS off. Also, set the radius as 500m and get Fix.
    • Now create a new task & click on the “+” icon.
    • Go to the net and then click on “Wi-Fi” and turn it on.
    • Create another task and click on “+” icon and name it “Leaving Home.” Now in this section, you need to turn off your Wi-Fi. So go to “Net” and then search for Wi-Fi and turn it off.
    So by this process, your phone will automatically know when you are at the home and will make the Wi-Fi on.

    17. Set Your Phone To Mute In Meetings

    Having your phone ring up or vibrate while being in a meeting can become embarrassing. So with these steps, we can make your phone go mute during meetings.
    • Go to the Profile screen of Tasker.
    • Click on “New” and choose “State.”
    • Press “App” and choose the “Calendar Entry” and change the availability to No.
    • Long press on the entry field named Calendar to select your primary Calendar. Then click Done.
    • Now create a new task & hit on the “+” icon.
    • Go to Audio Settings and select “Silent Mode” and turn it On. Now click on Done.
    • On the next page, click on Done again to return to the main screen of Tasker.
    Next time when you are in a meeting neither will your phone ring or vibrate.

    18. Separate Button To Turn 3G Data On Or Off

    Rather than having to go to your settings and turn off your mobile data, what if there was a separate button on your home screen for the same!
    • Long press on an empty spot on your home screen, and soon a widget will appear.
    • Search for Tasker in that widget and select it.
    • On the Profile screen of Tasker, choose the 3G_Toggle task.
    • Now just select the green check mark to save your new widget.
    • That’s it, work done. You are free to change the widget icon to whatever you like.
    These above steps reduce the extra steps of going to Mobile settings every time to set your mobile data on.

    19. Turn The Camera On With A Simple Gesture

    • Just hold your phone in landscape mode, like you do while taking pics and your phone camera will click the pic.
    • Go to Profile screen of Tasker and click on “new” and Press on “event.”
    • Press  on “Sensor” and select gesture and name it “Camera gesture.”
    • Hold your phone in your left hand & long press on the volume down button.
    • Now hold your phone like you’re taking a picture in landscape mode. This will be the gesture.
    • While being in that landscape mode, long press on the volume down button again. Your gesture is now recorded.
    • Change your camera preferences in the “preferences” button.
    • Once you are done setting the preferences, the press was done and add a task, naming it “Camera On.”
    • Click on the “+” icon.
    • Click on “App” and navigate to “Load App.” Select “camera” and hit “Done” button.
    • Click on “Done” again and then press “Apply.” Next is just to test your Camera gesture.
    If you want, then you can also set some other gestures like waving the hand or smiling, etc. The only change will be in step 4 and 5 when you Need to perform your desired gesture to get it recorded.

    20. Speak Weather In The Morning

    Using this profile, you can have your phone talk to you the weather every day at the same time.
    • Download the Profile from this link.
    • Install the Profile and click on the task and change the HTTP.
    • Type the address of your city and state so that you can get the weather for your location.

    21. Build Your Phone – Finding Snitch Profile

    • Go to Tasker main “Profile” screen.
    • Click on”New” button and choose “Event” as your context.
    • Click on the “Phone” category, and create “Received SMS” as your event.
    • Now type your desired number and message in “Sender” and “Message” section respectively.
    • Click on Done.

    22. Lock Phone By Shaking

    How about locking your phone by just shaking it? Well here are the steps regarding how Tasker can do that for you.
    • Go to Tasker & Create a new profile.
    • Navigate to “Events”, hit “Sensor” and choose “Shake.”
    • Now enter your preferences for axis, sensitivity, and duration.
    • In next step, Create a new task and tap the “+” icon.
    • Click on “Display” and then select “System lock.”

    23. Remotely Enable GPS

    • Go to Tasker profile and click on “Event.”
    • Go to “phone” and click on ” received SMS” section.
    • Select the number that you own and set the message as “GPS On.”
    • Create a new task and tap the “+” icon.
    • Go to “Misc” and click on GPS.
    With this method, you can remotely enable your GPS without any trouble.

    24. Remotely Wipe Data

    Sometimes when you lose your phone, then we get apprehensive thinking about someone else getting to know about all the important details saved in our phone. By this method, you can remotely erase out all the data on your phone.
    • Go to Tasker profile and press “Event.”
    • Navigate to “phone” and choose ” received SMS” section.
    • Create a new task and tap the “+” icon.
    • Press “File” and choose ” Delete Directory.”
    • Now check for “Recurse” or else non-empty folders won’t be deleted.
    This process becomes helpful when somebody steals your phone, and you want to keep them off from peeking into any of the important details saved in your phone.

    25. Forward or Bock Certain Calls During Night Time

    Getting calls during resting hours sometimes gets on our nerves. So Tasker helps you by forwarding or blocking all calls during a period.
    • Go to Tasker profile and click on “Event.”
    • Now navigate to “Time” and adjust the time between 00:00 am to 07:00 am (or any other period of your preference).
    • Create a new task and tap the “+” icon.
    • Then go to “phone” and select call diverts or blocking call.
    • Now go back to having your happy nap without any disturbances.

    26. Disable Screen Lock when Camera is on

    Sometimes while clicking pics if the screen lock timer runs out then our phone automatically locks up itself. To stop this, you need to create this profile.
    • Go to Tasker profile and click on “Application.”
    • Then choose Camera from the collection of applications.
    • Create a new task and tap the “+” icon.
    • Click on “Display” and set the “screen timeout” to a very high value.

    27. Bluetooth Auto-Answer

    • Go to Profile.
    • Click on “New state” with context as “Bluetooth connected.”
    • Set the name same as the Bluetooth name of your device.
    • Click on Done.
    • Select that profile and tap on Add Context and Incoming Call but leave the Caller Number blank because we want all calls to be answered.
    • Create a new task and tap the “+” icon.
    • Check if your phone is idle and then “Wait” for 5 seconds.
    • Now “take the call.”

    28. Disabling Keyguard When At Home

     Having to enter your unlock code or keyguard pattern, even when you’re at home or the office might be very annoying. So with this profile, you can disable your keyguard while being at such regular locations.
    • Create a new profile and name it “Screen Unlock At Home.”
    • Add an event context for “Display unlocked.”
    • Add a state context for “WiFi near,” & enter the SSID of your home or office network.
    • Create a new task with the name “Wait” and adjust the time limit for 2-3 seconds.
    • Then navigate to ” Display” and select “Keyguard” and set it OFF.

    29. Enabling Keyguard When You Leave Office Or Home

    • Create a new profile with the name “Home.”
    • Add a “WiFi Connected” state context item, with your home/office SSID.
    • Create a new task and go to “Display” & then select “Keyguard” and set it ON.

    30. Read Out The Whatsapp Notification

    In this tasker profile when you get a what’s app notification while your display is off then your phone will read out loud that notification for you.
    • Create a profile and click on the + sign.
    • Go to an event and search for notification.
    • Select WhatsApp from the notification list.
    • Create another profile and click on “+” sign.
    • Go to state and click on “Display.”
    • Now go to “Display State” & turn it OFF.
    • Create a new task and click on “+” icon.
    • Click on Misc and select “Say.”
    • Now under the text field space, type “New WhatsApp %NTITLE.”
    So with this even when your display is off you get to know your WhatsApp notifications without actually having to open and look into your phone.

    31. Alert When Your Friends Try To Open Your Personal Stuff

    With this when any of your friends tried to open some of your apps like Facebook or what’s app then they first get an alert beep and your home screen pops up rather than the app being opened.
    • Create a new profile.
    • Go to Application and Select all your private apps
    • Create a new task and set action 1 as to go to home screen.
    • Now go to Alert and select beep.
    In next step go to flash and enter your desired message which you want to flash on your phone screen.

    32. Intruder Selfie

    When someone else tries to open up certain locked apps in your phone with multiple unsuccessful logins then, a discreet selfish will be clicked.
    • Download Secure Settings plugin from Google Play store.
    • Go to your settings and search for device administration and then provide permission to Tasker and secure setting.
    • Open Tasker and select Preferences and click on Misc.
    • Now click on ‘Allow external access’. This will allow Tasker to use external apps.
    • Create a profile and select State click on the plugin.
    • Now select secure setting and configure it by clicking on the small pencil icon.
    • Set the condition as maximum 4 failed login attempts.
    • Click on “device admin enabled’ and save it
    • Create a new task.
    • Select the Media option and click on take photo.
    • Now choose the front cam, & provide any filename like ‘snaps’ or ‘pics.’
    • Check the option ‘insert in the gallery’ and ‘discreet’.
    • Now go to display and click on “set wallpaper” and enter the storage path of the picture. By default, it is stored at this location /sdcard/DCIM/Tasker/pic.jpg.
    • Go to Misc and click on Say and type “Intruder detected”.

    33. Speak Up When Battery Is Low

    When battery level goes below a certain specified level then, a particular song will be played to Alert you and battery saver mode will be activated.
    • Create a new profile and go to State.
    • Click on Power & select Battery level. Now set your desired battery level, let’s say 9% to 10%.
    • Create another profile and select State.
    • Now go to Hardware and click on USB connected and select “Any”. Checkmark ‘invert’.
    • Create a new task and click on “+” icon.
    • Go to Media, select Music Play and then Paste the storage path of the mp3 file that you would like to be played when your battery becomes low.
    • Now go to Net & turn OFF Bluetooth, Auto Sync, and Wi-Fi.

    34. Automatically Turn on GPS/Bluetooth/Wi-Fi for MAPS App

    • Click on “New” from taskers main screen menu.
    • Click “Applications” and select Maps.
    • Create a new task and provide it a suitable name.
    • Now go to “Misc” and select GPS.
    • Set the GPS On.
    That’s all of the Tasker tricks and tips we have. Have better luck creating this profiles and take your device to an another level of automation.

    35. Switch Between Random Wallpapers In A Folder

    Looking at the same old wallpaper on your phone screen might get dull enough, yet we always forget to change our wallpapers. What if we could use Tasker to make it happen automatically for us? Well, that is possible.
    • Go to the Profile screen of Tasker.
    • Now create a new task & hit on the “+” icon.
    • Name the job as “Wallpaper Switcher.”
    • Add the Tasker to the variable set action.
    • Make a variable called “random_image_folder” and fix its value same as the folder’s name you wanna use as the base for your wallpaper.
    • Go to the script and add JavaScriptlet Action.
    • Now we need to set the codes in the javascript.
    • Now set the codes to

    var files = listFiles(randoimagefolder, false).split(“\n”);

    var number = Math.floor(Math.random() * (files.length));


    • Now add some Images into the folder and then create a profile which shows when the wallpaper should change.

    So those were few tasker profiles which you can use to automate tasks on your Android device. Please share a tasker profile that you use and you think is the coolest one which everyone should use. Leave your comments and suggestions, subscribe to our newletter below for more updates.

  • in ,

    Top 10 Best Gaming Laptops under 50000 in India 2017

    If you are looking for a budget friendly Gaming laptop just under Rs.50000 in India, well your search ends here. We have listed the top 10 best Gaming laptops available in the Indian market as of July 2017. This list contains various Gaming Notebooks/laptops from Dell, Lenovo,  Asus, and HP. You can choose any or the best laptop from below list on the basis of your need, high-end specification, price, and performance. This best gaming laptops list is created on the basis of high-end processing speed CPU, RAM,  graphic card (GPU) – Very important, and HDD/SSD for data storage.

    Asus R558UF-XO043T Notebook

    Lenovo under 50000

    • 2.3GHz Intel Core i5-6200U processor
    • 4GB DDR3 RAM
    • 1TB 5400rpm Serial ATA hard drive
    • 15.6-inch screen, Nvidia GeForce 930M 2GB Graphics
    • Windows 10, 64Bit operating system

    Buy From Amazon

    Dell Inspiron 15 3543


    • Processor Name and Clock Speed-Core i5 (5th Gen)-Turbo Max 2.7GHz
    • RAM-8GB
    • Hard Disk Capacity &RPM-1TB,5400
    • Optical Drive-Tray load DVD Drive (Reads and Writes to DVD/CD)
    • Operating System-Windows 8.1

    Buy From Amazon

    Lenovo U41-70 Notebook


    • 2.2GHz Intel Core i3 5020U processor
    • 4GB DDR3 RAM
    • 1GB 5400rpm Serial ATA hard drive
    • 14-inch screen, Integrated Graphics
    • Windows 8.1 operating system
    • 1 year warranty provided by the manufacturer from the date of purchase

    Buy From Amazon

    Lenovo Z51-70 80K60002IN

    Z51-70 80K60002IN

    • 5th Gen Intel® CoreTM i7-5500U Processor | 8 GB Memory
    • SSHD 1TB 9.5MM 5400RPM(8G) | Screen Size “15.6” FHD TN AG(SLIM)
    • Win 8.1 | Weight 2.3 Kg.

    Buy From Amazon

    HP Pavilion 15-ab219TX

    HP Pavilion 15-ab219TX

    • 2.2GHz Intel Core i5 5200U processor
    • 8GB DDR3 RAM
    • 1TB 5400rpm Serial ATA hard drive
    • 15.6-inch screen, Nvidia GeForce 940M 2GB Graphics
    • Windows 10, 64Bit operating system
    • Weight: 2.29 kilograms

    Buy From Amazon

    Lenovo Ideapad 500-15ISK

    Lenovo Ideapad 500-15ISK

    • Core i5 (6th Gen) 6200U 2.3 GHz Base, Max 2.8 GHz, 3MB cache
    • 8 GB DDR3L RAM, 1 TB HDD, 4GB DDR3L AMD MESO XT Dedicated Graphics, Win 10 Home Edition
    • 9.0MM SUPER MULTI(TRAY IN) Optical Drive, 4-Cell AC Adaptor 65W 3-PIN
    • 1920×1080 Pixels resolution Full HD TN GL(SLIM), 1 x USB 3.0; 1x USB 2.0
    • 3D Camera, Backlit Keyboard, 4-in-1 (SD, SDHC, SDXC, MMC), V4.0 Bluetooth

    Buy From Amazon

    Lenovo G50-80 80E5038PIN

    Lenovo G50-80 80E5038PIN

    • Input Pointer Device Touchpad with Multi-touch Gesture Support
    • Web Camera HD Webcam Keyboard
    • AccuType Keyboard
    • Power Supply 65 W AC Adapter (Li-Ion Battery)
    • Battery Backup Upto 4 hours
    • Display Resolution 1366 x 768 pixels
    • Screen Size 15.6 inch Screen Type HD TN GL Flat Display
    • Bluetooth v4.0 Wireless LAN Intel 3160 1×1 AC Ports/Slots

    Multi Card Slot 2-in-1 Card Reader USB Port 1 x USB 3.0, 2 x USB 2.0 HDMI Port Yes RJ45 LAN Yes Other Ports Audio Port: 1/8 inch Stereo, Headphone and Microphone Combo Jack Storage HDD Capacity 1 TB RPM 5400 Hardware Interface SATA General Brand Lenovo Part Number 80E5038PIN Model ID G50-80 Lifestyle Everyday Use Color Black Memory Expandable Memory Upto 16 GB RAM Frequency 1600 MHz System Memory 8 GB DDR3 Optical Disk Drive Optical Drive CD/DVD writer Accessories Laptop Bag Yes Machine Dimensions Weight 2.5 kg Dimension 384 x 265 x 25 mm Color Black Graphics Dedicated Graphics Memory Capacity 2 GB Graphic Processor ATI EXO PRO R5 M330 Dedicated Graphics Memory Type DDR3 Audio Sound 2 x 1.5 W Speakers, Stereo with Dolby Advanced Audio Speakers Yes Platform Operating System Windows 10 System Architecture 64 bit OS Architecture 64 bit Processor Brand Intel Cache 3 MB Variant 5200U Processor Intel Core i5 (5th Gen) Clock Speed 2.2 GHz with Turbo Boost Upto 2.7 GHz

    Buy From Amazon

    HP W6T28PA 15-be001TX

    HP W6T28PA 15-be001TX

    • 2.3GHz Intel Core i5-6200U processor
    • 8GB DDR4 RAM
    • 1TB 5400rpm Serial ATA hard drive
    • 15.6-inch screen, AMD Radeon R5 M430 2GB Graphics
    • Windows 10 Home operating system
    • 2.19kg laptop
    • 1 year warranty from manufacturer from date of purchase

    Buy From Amazon

    Lenovo IdeaPad 300-15ISK(80Q700V1IH)

    Lenovo IdeaPad 300-15ISK(80Q700V1IH)

    • 3.1GHz Intel Core i7-6500U processor
    • 8GB DDR3 RAM
    • 1TB 5400rpm Serial ATA hard drive
    • 15.6-inch screen, AMD Radeon R5-M330 2GB Graphics
    • Windows 10 operating system

    Buy From Amazon

    Lenovo  Ideapad 310 Notebook

    Lenovo  Ideapad 310 Notebook

    • CPU: Intel Core i5-7200U Processor
    • MEMORY: 8GB DDR4, STORAGE: 1TB 9.5MM 5400RPM
    • DISPLAY: 15.6 FHD TN GL (Slim)
    • 1 Year Manufacturer Warranty
    • DVD RW, Wifi, Webcam, Dos 1 Year Warranty

    Buy From Amazon



  • in ,

    InFocus Snap 4 – Unboxing and Review

    So today we got our hands on the all-new InFocus Snap 4. InFocus has already released Turbo 5 Plus Dual camera phone available for Rs.8,999 exclusively on Amazon which comes with a massive 4850Mah Battery. Earlier this year, InFocus released Turbo 5 with 5000mah battery and fingerprint sensor for Rs. 6999 and 7999. Check out our Gaming review and Unbox video of InFocus Turbo 5.

    Now Let’s get back to the new InFocus Snap 4. The Snap 4 smartphone was just launched in India and This Android smartphone comes with 4 Cameras. Yes, you heard it right. 4 Cameras. The InFocus Snap 4 boasts dual rear cameras of 13 megapixels and 8 megapixels and the dual front cameras of 8 megapixels each. We will talk more about camera and quality later in this video. But Before that let’s unbox the Snap 4.InFocus Snap 4 Unboxing & Camera Review - Quad Camera Smartphone 2017 - YouTube

    Unboxing InFocus Snap 4

    Inside the box, we have the InFocus Snap 4 Smartphone. Then there is this user manual and warranty slip. The Snap 4 comes with InEar earphones which are of Ok quality, has an inferior plastic feel but the sound quality coming out was loud and decent when I tested. Then we have a USB Charging cable, quality is good and then a 5V 2Amp charging adapter. Then there is a SIM ejection tool. So that’s all that we get with the Snap 4.2017-09-28 06_59_45-InFocus Snap 4 Unboxing & Camera Review - 4 Quad Camera Smartphone 2017 - YouTube Snap 4 with BOX 2017-09-28 07_00_33-InFocus Snap 4 Unboxing & Camera Review - Quad Camera Smartphone 2017 - YouTube4

    InFocus Snap 4 First Look & Impressions

    So the first impression, it looks really nice and feels premium. I must say, InFocus has come out with a really nice design. This device has a metal unibody design that gives it a premium look and feels. On the corner, the diamond cut edges make it look a bit sleeker and slimmer. On the left, you will find the volume rockers, Right side has the Power button and SIM tray port. On the top, there is a 3.5mm Audio jack and on the bottom, it has the Micro USB charging port and speaker grill.

    Home Button EDGE Audio

    The speakers are pretty loud and the sound is clear. The Snap 4 has the capacitive navigation bar at the bottom of the display and I like the circle Home screen button, improves the device looks overall. the Fingerprint sensor is at the back, it’s quite snappy and unlocks the device in no time.
    The Snap 4 does not only looks better but it also comes with some really good hardware specs. This phone comes with a 5.20-inch 720P HD IPS touchscreen display with 2.5D Curved protective glass which protects device display from scratches and minor falls.

    InFocus Snap 4 Hardware Specs

    The phone is powered by a 64-Bit 1.5 GHz Octa-core MediaTek MT6750N processor and it comes with 4 of RAM. So a really powerful device with Octa cores in the CPU and 4 GB of RAM ensures the phone runs smoothly with multiple applications open simultaneously. The InFocus Turbo 5 Plus also packs in a Mali T860 MP2 Dual graphics processor that we will test out in next Gaming review video of Snap 4. It comes with 64 GB of internal storage which can be expanded to 64 via a microSD card. You can use either two sim Cards or One SIM Card and a MicroSD Card.

    The InFocus Snap 4 runs Android 7.0 OS out of the box and is powered by a 3000mah mAh battery., and connectivity options on the InFocus Snap 4 includes, 4G VoLTE, GPS, Wifi, Bluetooth 4.0 and FM Radio.

    Snap 4 Camera Quality

    We tested the Camera of Snap 4 in different light conditions and distance. The Dual rear cameras can record videos up to 30FPS, However, you can adjust frame rate, but you can choose the quality of Video. Then there is the beauty mode which improves picture quality. You can also shoot Panorama Shots and Time Lapse videos with this Snap 4 device, which is really cool.
    Wide angle Dual Front camera allows you to take wider selfies or group portraits with no struggle.IMG_20170924_112944 IMG_20170924_112940 IMG_20170924_113012

    You can choose between wide angle selfie mode, turn on Front flash like in iPhone devices where the display glows up white, good for low light condition. The dual front camera also allows you to add Bokeh effects, allowing you to blur the background while taking selfies or Wefies. The Fingerprint touch sensor allows you to click selfies quickly. Not only that, if you want you may shoot Time-Lapse video using front camera also, and create some funny videos or take amazing shots.

    How & Where to Buy InFocus Snap 4

    The Snap 4 is on Sale from 26 September 2017, it’s an Amazon exclusive, so if you want one, visit this link. In my next video, I will try comparing it with the new Zenfone 4 Dual Camera version which costs 14999, 3000 Rupees higher than the Snap 4. You can click here to watch the Zenfone 4 Selfie Pro and Dual camera version review or follow the link in the description. I will be back soon with Gaming review video of Snap 4 soon. So if you want to see gaming performance of Snap 4 and other Benchmarks, Hit Thumbs up and Subscribe button to get new video updates. I will be back with a new video and review post soon, have a wonderful time.

  • in , , ,

    How to Recover Deleted Files – 5 Easy ways

    Recover deleted files from PC

    It’s very common that one might accidentally delete important files from their system. It happened to me recently when i was trying to setup my Dell 7560 with Hackintosh and Windows on separate disks. I saved my video recordings on Hackintosh drive to empty camera card. So while installation, something went horribly wrong and it was totally unexpected, the Hackintosh stopped booting. So first step was to use HFS explorer to explore the Hackintosh partition and try to recover files. But this was not a software issue, it was an issue with the SSD. So atlast i had to format it and i wasn’t able to recover my files. Basically, you can’t recover data from drive if you formatted it or added/copied new files.

    Recover deleted files from PC

    How Data Recovery Works?

    The file that you deleted accidentally, free up the space where it was stored in the disk. But you can recover these files only if your system has not used that space. So if by mistake you delete a file and need to recover it, DO NOT DOWNLOAD ANYTHING or Copy any file from any other storage device. A new file can occupy the space where your previous file was residing. Next, to recover deleted files you can use any of the following free data recovery tools available in the market. If these doesn’t workout for you to completely recover data, it’s recommended to go for paid data recovery tools.


    Recuva (pronounced “recover”) is a freeware Windows utility to restore files that have been accidentally deleted from your computer. This includes files emptied from the Recycle bin as well as images and other files that have been deleted by user error from digital camera memory cards or MP3 players. It will even bring back files that have been deleted from your iPod, or by bugs, crashes and viruses!

    Glary Utilities

    Glary Utilities offers numerous powerful and easy-to-use system tools and utilities to fix, speed up, maintain and protect your PC.GlaryUtilities

    It provides in 23 languages registry and disk cleaning, startup delay, privacy protection, performance accelerator and amazing multifunctional tools. It can fix dogged registry errors, wipe off clutters, optimize internet speed, safeguard confidential files and maintain maximum performance.

    It is designed for both novice and professionals. User-friendly interface shows clear & detailed directions. For novice, all work can be done with just 1 or 2 clicks, while for professionals, abundant options are available.


    DiskDigger is a program that undeletes and recovers lost files from your hard drive, memory cards, USB flash drives — you name it! Whether you accidentally deleted some documents or photos from your computer, reformatted your camera’s memory card, or want to see what files are lurking on an old USB drive, DiskDigger is here for you.Disk Digger

    Disk Drill

    Disk Drill is a data recovery software that easily protects your files from accidental deletion with Recovery Vault and recovers lost data from disks. Disk Drill supports most of storage drives, file types and file systems. Disk Drill for Mac OS X recovers deleted files from iPhone and Android devices! This data recovery software can also find duplicate files, clean your disk and visualize disk space usage; offers bootable data recovery drive, byte-to-byte backups, disk health monitoring, and more.

    Disk Drill
    When something is deleted Recovery Vault makes it possible to recover not only the file itself, but also its properties, such as original file name, location, etc. So you will always be able to recover data from files system (HFS/HFS+) & FAT32 partitions. Disk Drill also includes powerful S.M.A.R.T. disk monitoring right out-of-the-box; you can monitor your disks’ hardware status and get automatic notifications of potential failures or other issues. If a disk or partition is failing, you can easily backup it into a disk image (DMG) which can later be mounted for recovery.

    Disk Drill PRO features a number of advanced scanning modes for data recovery of FAT, NTFS, HFS/HFS+, other file systems and formatted (initialized) drives. Using Quick Scan you can locate deleted items on FAT and NTFS disks, this scanning method is fast and accurate, but is unlikely to find data deleted long ago. With Deep Scan you can try to recover data from any disk or memory card regardless of their file system. This recovery method scans your disk in a binary mode and is capable of finding deleted files even after formatting.

    MiniTool Power Data RecoveryMiniTool-Power-Data-Recovery-Free-Edition_1

    MiniTool Power Data Recovery is all in one data recovery software for both home and business users. It can recover deleted data from Windows Recycle Bin, restore lost data even the partition is formatted or deleted, restore data from corrupted hard drive, virus infection, unexpected system shutdown or software failure. It support IDE, SATA, SCSI, USB hard disk, memory card, USB flash drive, CD/DVD, Blue-Ray Disk, iPod. MiniTool Power Data Recovery contains five data recovery modules – UndeleteRecovery, Damaged Partition Recovery, Lost Partition Recovery, Digital Media Recovery, CD & DVD Recovery. Each data recovery module focuses on different data loss scenario.

  • in , , ,

    How to Download Windows 10 Creators from Official Site -100% free

    Download Windows 10 Creators ISO for free

    There was a simple hack previously shared in one of my post. Usually when you visited Microsoft site, it only allowed you to download Windows 10 OS (limited Editions of both 32-bit and 64-bit). Using that Hack, you were able to download 56 different Windows 7, 8 and 10 Editions without any key. But then Microsoft found out this vulnerability in there website and fixed it. From then that hack stopped working. However, you can still download 6 versions of the Official Windows 10 which includes Creators update for free and from official Microsoft website. So let’s get started, Download Windows 10 Creators ISO for free

    How to Download Windows 10 ISO for free from Official Site

    This trick is really simple and very easy. Only requirement is that you should have an Android smartphone with atleast 4GB free space. Then,
    • Go open Play Store and install ADM(Advance Download Manager) app.
    • Then Open any web browser in your Android device and visit this URL.
    • Next, select the Windows 10 edition from the drop down, hit Confirm.
    • Then choose Product Language and hit Confirm again
    • Finally, choose from 32-bit or 64-bit Windows ISO and this will start downloading Windows 10 ISO.
    • The link will be valid for 24-hrs only and it supports Resume. So it’s recommended to use download manager like ADM to download Windows 10 ISO from official links.

    You may use any other device like a Macbook or a Linux PC to do the same. All steps will be same. If you try to visit the URL from a Windows PC. You will be allowed to download Windows Creation Tool, not the Windows ISO.

    So there you have it, Windows 10 ISO, go ahead and install it in any PC or Laptop that you have or use it to repair your Windows PC. For more such tips and Tricks, do subscribe to our newsletter and stay updated. Follow us on Facebook and Twitter for quick bytes.
  • in , ,

    Protect Your Windows PC from this Easy but Effective Hack

    So today we will talk about how you, yes You can hack any windows PC, no matter if it’s a Windows 7, 8, 8.1 or Windows 10 or Windows 10 Creators update. You can hack a Windows administrator account within 5 Minutes. Yes, less than 5 Minutes. Not only that I will also show you how to protect your PC from these hacks. So let’s get started and hack a Windows Admin Account.Hack any Windows PC and How to Protect it


    Before we begin, I want you to know that This video is entirely for educational purpose and with this video, i am trying to aware you people about the vulnerabilities that still reside in a Windows Operating System. So Don’t use this to harm anyone or for stealing data or information from any PC as it’s illegal and you may find yourself behind bars. Sooner or later.

    Before We Start

    At the end of this video as i said I will also show you what are the ways to protect your system from this simple but most effective Hack. So watch this video till the end or you may skip some important points if you skip this video. Also, I want you to please share this video as much as possible with your friend and relatives and help them protect their System. Now let’s begin.

    So to Hack a Windows PC, no matter what version of Windows. All you need is a USB Thumb drive where we will copy Linux installation files using tools like Rufus. So download any Linux Version that you like. You can prefer Puppy Linux as it’s very small in Size. I am using Kali Linux here as I already have Kali Linux ISO on my PC.

    Run Rufus app and create a Linux installation drive.

    Once done, you can now use this thumb drive to hack into any Windows PC. So let me show you how?

    Hacking a PC with a  USB Drive

    First, find the machine you want to hack, once you locate the victim, open his or her laptop or PC and insert your USB Thumb drive. Now press the Power button to boot the system and immediately, just after pressing the power button, Start pressing the F2 key or DEL key to access the BIOS. Inside BIOS, Turn of the Secure Boot. Save settings, Exit and then start press F12 key to see boot options. Under boot options, you will find the Thumb drive, select it and boot.

    • Now run the Linux in Live mode. Open the File Explorere or manager in linux and locate the Windows OS Disk. Next, Open the disk, Go to Windows, System32 and the search for CMD.exe
    • Rename it to CMD1.exe
    • Next Search for SETHC.exe and rename it to CMD.exe. Then finally rename CMD1 as Sethc.exe
    • That’s it. We have completed all necessary steps. Now simply restart the system and remove your thumb drive. You will see Windows Login Screen asking for a password to login which we obviously don’t know.
    • But now we can easily change the password and hack into the system. To do  so, press shift key 5 times continuosly. A CMD window will appear.
    • Now type command
    net users
    • This command will show you all the user accounts on the PC. Find the administrator account name and then type
    net user AdminAccountName NEWPASSWORD
    • You can type anything in password field and hit enter. Now you can use the password you entered in the cmd command to login to system admin account. As simple as that.

    So it’s a very quick way to hack any windows PC. I know some of you might be scared after watching this, but it’s true, anyone with very little knowledge of computing can easily hack into any windows PC, specially after watching this video. But again, my motto is not to scare you people but to aware you guys about this vulnerability and also teach you how to protect your systems.

    How to Protect Windows from This and other Hack

    So to safeguard yourself from this hack, all you have to do is disbale the Sticky Keys in Windows. To do so,

    • Go to Ease of Access center.
    • Next click on “Make the keyboard easier to use”.
    • Then, click on Setup Sticky Keys. Then simply uncheck “Turn on Sticky Keys when shift is pressed 5 times”. That’s it.

    So from now, this hack that I explained will not work and you can confirm it by try logging out and repeating steps again. But this is not the only way to get into anyone’s PC withut permissions. There are some other ways with which one can easily access your Windows account and can even leave a malware or trojan and can monitor all your activities remotely and you may never know.

    So get a good Antivirus and disbale all unnecessary programs to boot at startup. This will not only help your system boot faster but also protect any malware or malicious code from getting executed at startup. So keep track of startup programs. You can use program like CCleaner for quick access.

    Other than that, you may add a password in BIOS. So everytime when you start the system, it will ask for the Admin password and this is almost impossible to hack. SO from now no one can access your BIOS or anything on your System.

    So that’s all people, Subscribe now for more videos like this. I hope this video post will help you and others to protect their PC from this vulnerability. I will be uploading other videos on Hacking and stuff, so stay tuned and like this video. Also share this video as much as possible to spread awareness among all windows users and help them protect their PC or Laptops, most important, the data and info in it. So stay safe and keep visiting Techposts for more videos. Thanks you, have a great day.

  • in

    iOS 11 Beta Control Center for All Android Devices

    In this post, I will show you how you get the new iOS 11 Control Center on any Android Device. This not only looks beautiful but unlike other apps, this one works without any hiccups. So if you want the iOS 11 Control center on Your Android, this app is the best bet.iOS 11 Control Center for Any Android NO ROOT

    Install iOS 11 Control Center APK

    Setup iOS 11 Control Center APK

    Once you install the app, open it and then the app will ask for various permissions, which you will have to grant for it to work. The app needs these permissions to work properly. If you don’t grant these permissions to the app, it will crash and will not work properly. Moreover, it is really easy. The app itself will guide you to the settings page and all you will need to do is to enable the respective setting for the app.

    Once you grant the permission, you can open the app to access its settings. The app settings page allows to highly customise the Control Center. For example, you can decide, if you want to access the Control Center using the bottom, right, or the left swipe. Here you can also enable the size and colour of the swipe area. You may also enable the “Show on everything” option, this will allow you to access the Control Center from everywhere (even from the lock screen).

    One clean feature of this app is that other than adding settings, you can also add app shortcuts. On the app’s homepage, tap on “Add favorite app” and then press the (+) icon. Now, you will be guided to a list of all your apps and you can choose the one you like. You can choose upto 4 apps.

    There are a lot of other settings to play with. For example, you can enable “Assistive Touch”, change the colour and the background of the Control Center, and change the language among other things. Feel free to explore the settings and customise the Control Center to your liking.

    There’s one more point that I want to discuss and that is the 3D-touch part. You can use the 3D-touch gesture present on the iPhone by long pressing an icon on the Control Center. However, it doesn’t work for all the icons. So when you long press an icon, let’s say Volume control, it will open all three volume bars. Similarly, Long press on Music to open the Music player.

    Probably the only bad thing about this app is that it is supported by ads. And everytome you press Back Button, it will open the ad page which is too annoying. Also, There’s no pro version, so you cannot disable the ads even if you want to. However, the good thing is, once you finish setting up the app, you don’t need to open the app again and again.

    You may also use Assistive Touch option for which you need to install Assistive Touch app from the same developer. This will give you a floating Touch button which works with iOS 11 Control Center. You can further customize the looks and functions inside the Assistive touch app.

    Please Give this video a thumbs up if you liked it, Subscribe to our channel now for more videos like this and share this video with your friends. I will be back with a new interesting video guide soon, Thanks for watching, Have a Great day.

  • in , ,

    How to Downgrade Android Apps without Loosing App Data – NO ROOT

    How to DownGrade android app

    Sometimes an app update comes along from Play Store but you wish you to stay with the current version and don’t want to update. But if Automatic updates are enabled, your apps will be updated automatically whenever any update comes in. Updates are always good but sometimes you wish to stick with the older version of the app, for some reasons. If somehow, your app has been updated and you wish to downgrade it without losing the data associated with the app, you can use the ADB capabilities of your Android device. Adb has a lot of control over your device than you can normally access. Root users may prefer to use something like App Downgrader on the Play Store. But for Non-Rooted users Uninstalling the updated version, then downloading apk and installing the app will coz loss of app data. Using ADB, it’s possible to downgrade an Android app version while keeping all of your data and without root permissions.How to DownGrade android app

    So rather than having to uninstall WhatsApp or any app for the purpose and go through the pain of logging into your account again, you can simply use this tutorial to downgrade app, using the only adb. If you want to downgrade an app, proceed with this tutorial but first, you need to have working ADB drivers on your PC. You can follow my Guide on How to Install Adb Drivers on Windows, Linux, and MacOS. You may also use a simple way to use ADB.

    • Download the adb tools zip file on your PC. For macOS, Download This Folder.
    • Extract adb tools anywhere on your PC.
    • Open the folder containing adb tools, right click while holding the Shift key. Click on Open Command prompt here.
    • Next, run ADB commands and you are good to go.

    But be careful while downgrading an app as some Applications may upgrade databases with newer versions and downgrading may render these database files unreadable by the older version of the same application but this is rare.

    How to Downgrade an Android App using ADB

    So first, Find the APK of the app version you want to downgrade to using APKmirror or similar site like XDA Labs. Open the folder containing your

    Open the folder containing your adb tools. Copy your apk file that you wish to downgrade to into this folder and open your command prompt by Right click while holding Shift Key.

    Enable USB debugging on your device by entering Developer Options.

    I don’t see Developer Options in Settings,

    If you don’t see Developer Options, then go to “About Phone” in Settings and tap “Build number” 7 times until a toast appears. Next, press the back button and you should see a Developer Options section. Check USB debugging here and then connect your phone to your PC.

    When ready to downgrade the app, run the following commands in your command window.

    adb push app.apk /sdcard/app.apk 
    adb shell pm install -r -d /sdcard/app.apk

    Where “app.apk” is the apk file you have downloaded and want to downgrade to. Allow your phone to be debugged on the prompt on your screen if this is the first time you’re ever running adb on this phone. The application should then be downgraded and your data kept intact.

    What is actually happening when we run those commands?

    We use the first command to push the apk file to our device’s internal storage.

    Then we used adb shell command with “pm” which calls the package manager on your device, and “install” installs the application.

    The flag “-r” means “retain data” and “-d” means “downgrade”. So using both flags,  you can downgrade an app on your phone and your phone does not clear the folder belonging to the application when it downgrades. Easy Right?

    Please comment below if you succeeded, if not ask us and we will help you ASAP. Visit our YouTube Channel for more How-To Guides and Much more related to Tech. Subscribe our newsletter to stay updated about new posts.

  • in , ,

    7 Cool New WhatsApp Tricks and Hacks You Should Know (2017)

    In this post, I will show you the 7 new cool WhatsApp tricks, secret features, hidden features, and hacks that every User should know.

    1. Send Pictures Without Compression

    Usually, when you share or send a photo or a picture to someone, Whatsapp compresses it to save data. This degrades the picture quality significantly. But you can send High definition pictures as it is without compression via Whatsapp. To do so, Tap on Attachment icon, select Documents instead of Camera or Photos and then browse the picture which you want to send. Select it and send. It will be uploaded and sent as a document file and when you tap to open it, it will open in your image browser and quality of the picture will be the same.

    2. Read Messages without Sending Read Receipts

    To read messages without sending the blue tick to the sender, you can add the Whatsapp widget on Your Homescreen and then whenever a message comes, just scroll it and read it. This way sender will receive delivery ticks but not read receipt.

    3. Schedule WhatsApp Messages

    To use this feature, we need to use this third party app called Sqedit. This app helps you to schedule messages on Whatsapp and it sends message automatically. So next time if you have to wish someone on his or her B’day, just Schedule a beautiful Birthday wish and relax. This app will do will do rest of the work..

    4. Create GIFs Directly in WhatsApp

    GIFs are better than short video clips and can also be used instead of Emoji. GIFs also became very popular in recent times and now you can also create your own GIFs on Whatsapp and send to anyone.

    To do so, you can either capture a clip of your or select a video from the gallery and then adjust the length of the video to either 6 or less than 6 Seconds. Then tap on GIF tab just below the clip. You may also add text, apply color, or insert emoji in the clip. Once done, hit the Send button and this will send the GIF you created from the video clip. Interesting, right?

    5. Use a Fake Number for WhatsApp

    If you don’t want to share your WhatsApp number with everyone, You can use a fake number to register on Whatsapp and then use the Whatsapp with that fake number. Share it with people you don’t know well or if you don’t want to share for any reason.

    To do so, you need the Primo app which is free to install from Play Store. Open the app and register with your Phone number and Email ID, You must verify both details and after that, you can tap on Activate button and start your trial. You will get a Number which you can use to register on Whatsapp. You will receive a text message from Whatsapp and verify your number to create a new Whatsapp account.

    You can now share this number with anyone without getting worried about your privacy.

    6. Get Chat Heads for WhatsApp

    This is similar to Facebook chat heads. While browsing the web or watching videos on phone or if you are reading articles, you may receive messages from someone and want to reply. For that, you need to tap on notification and then reply and then again go back to what you doing. To avoid this, you may use this app called NotiFly. It’s a free app. Make sure to grant permissions and then activate Whatsapp. You can go to settings to further customize the color theme and other notification settings.

    Once done, exit the app. And from now when you receive a Whatsapp message, you will see this nice Whatsapp chat head and you can reply to the person directly while doing what you were doing without exiting the current app.

    7. Send Message without Adding Contact

    This is something which I think most people will find helpful. This trick will let you send a message to a person whose contact number is not saved in your contact list. So let’s say you have to send a message to someone whose number is not in your list, you can install this app called Click2Chat and open it. Then paste the Number to whom you want to send WhatsApp message. Then Write your Message and tap on Send Now or send later. Send later will let you schedule the message while send now will instantly open up the Whatsapp message with message typed in the box. Now all you have to do is tap on Send icon to send the message to a number which is not safe in your contact list.

  • in , ,

    How to Get 100GB Space on Any Android or iPhone for Free and forever

    In this post, I will show you how to Get 100GB Space on Any Android or iPhone for Free and forever. Now anyone can get more than 100GB Cloud storage on their Android phone for free.  It’s safe, secure and fast. This is like a 100GB SD Card on Cloud. You can increase more space by watching video ads. Store all your Pictures and Videos on this Storage and free up internal Storage of your Android for other files and also to make your device faster. So if your Android device or iPhone is struggling with low storage, follow this guide.

    How to Get 100GB Storage for free forever on Android & iPhone

    1. To get 100GB free cloud storage, you must install Degoo app from Play Store. It’s free.
    2. After install, open the App and register with your email ID or directly with your Google Account.
    3. Allow permissions and then select which files or folders you want to backup. You can also add more folders manually for backup and this app works as an SD card but on Cloud.

    That’s it. So next time when you download a file or Click a Picture, it will be uploaded automatically, saving storage on your Android device.

    Backup what you want on 100GB

    You can go to feeds and then browse all the pictures, documents and all other files from all your devices and from anywhere. You can also send those files to your friends and share them directly from the app in High quality and securely.

    How to get More than 100GB Storage

    You can also earn extra GBs by watching video ads. So it’s not limited to only 100GB. You can watch ads and for watching every ad, you will get an additional 1GB storage. You can also earn extra storage by completing different promotional offers and by referring people.

    Earn Extra GB Storage for watching ads

    Degoo app has a feature called Photo Storage Maximizer. This feature allows you to choose if you want to compress pictures stored on your device storage which will free a lot of storage space on your Android. All your pictures will be uploaded in High Quality on cloud and you can access them and share them anytime and from anywhere.

    Photo storage Maximizer to increase STorage on your Android and iPhone

    In Settings, you can choose How you want to backup your files and folders, like on WiFi or on Mobile Network and while charging. You can also turn on recycle bin if you want to keep the deleted files or not if you delete a file from your phone, either intentionally or accidentally.


    Secure Files from Unauthorised Access

    You can Enable PIN lock also to avoid any unauthorized access and enable or disable various notifications like upload Notifications. So next, time if you want to watch a video, you can stream it from Degoo cloud without downloading in Real Time. Degoo’s, as I said, is free forever and is secure. you may upgrade to their 200GB plan if 100GB is less for you.Pin Lock to Secure Files and Folders

    Perks of using Degoo App (SD Card on Cloud):

    1. If you have an Android or iPhone Device, you can increase your storage space up to 100GB for free.
    2. Your files are secure and will be safe even if your device is lost.
    3. Access all your pictures, Videos, Documents and other files with just a few taps and from any device and from anywhere in the world.
    4. It’s 100% Free but if you want more than 100GB, upgrade to 200GB Plan and get more storage.
    5. Works on All Android devices, no matter what specifications.
    6. Works on all iOS Devices also like iPhone 5, iPhone 6, 6s, 7, 7 Plus and iPads.
    7. You can access files from multiple devices as it is available for Windows, macOS, iOS and Android platform.
    8. Get more Internal Storage for free by watching Sponsered video ads.

    Share and Subscribe, please.

  • in ,

    Top 5+ OTG Cable Uses You Should Know in 2017

    Today i will show you the Top 6 Uses of Android On-The-Go which is also known as USB OTG or simply OTG cable which allows other USB devices to connect with your Android Phone and extend device’s functionality. But did you know OTG Cable is capable of doing lot more than just transferring Data? Well, this post is all about best uses of OTG cable which you probably don’t know. So let’s get started.

    Control DSLR Camera With Your Android

    If you own a DSLR with non Rotating display or if you planning to buy an external display for the detailed Live view then this hack will definitely go to help you and mostly to my fellow YouTubers. with the help of an OTG Cable or adapter, one can use Android device as an External Display and can even control all the settings like Aperture, Shutter Speed, ISO with just a few taps.
    Not only that it can capture photos, help you Focus on the subject precisely, record videos and you can even view captured photos, Videos and delete them if you don’t like them. There are several apps available on the PlayStore. Most of the compatible and working apps are paid like the CamCap, DSLR Controller. But I am using qDSLRDashboard app which is also a paid app but works perfectly fine with my D5200. I tried DSLR Controller and CamCap but they don’t work with this model.Control DSLR with Android Phone

    Connect USB Mic with Android

    Just like a DSLR, one can also connect an external microphone to record voice in Android. This is also something which most Youtubers will find very helpful. Users can connect the external microphone on to the Android using OTG cable and can record it using any Third party Voice recording app like RecForge. I use this Zoom H1 Audio Recorder and it works well. No extra Settings required.Connect a USB Mic to Android

    Charge One Android with Another

    This is the technique which Android users will love to utilize as this allows you to charge two smartphones. The phone which acts as the USB host will automatically charge the other device. This technique comes very handily if you need to charge your phone in an emergency. All you need is an OTG cable or adapter and your Android charging USB cable.
    Also, with the help of Samsung’s SmartSwitch app, you can transfer messages, call logs, contacts and much more between Android devices with the help of OTG cable. This is very useful and also consumes less battery.Charge one Android Phone with Another

    Connect a Game Controller to Play games on Android

    If you love playing games, you probably know how boring it is to play first person shooting Games in an Android device. So I use this RedGear Game controller which works both on PC and Android. Nowadays many Android games support external gamepad, and you can easily connect an external game controller to your device using OTG cable. This RedGear Wireless controller is available for Just 1150 Rupees on Amazon. To watch full review of this controller, click here or use the link in the Description.Connect a Game Controller with Android

    The best thing about this controller is that it doesn’t require any third-party app to configure or map keys for different games, it’s hassle-free, Plug and Play Game Controller.

    Pair Keyboard and Mouse with Android

    If you don’t like to navigate your Android device or If you use messaging apps like WhatsApp and Facebook a lot then a Wireless Mouse and keyboard will definitely help you to exchange messages quickly. You can connect your USB mouse and Keyboard with your Android device using OTG cable. Now, this is something which most people won’t use but we thought to include it in our Top Uses of OTG. The reason, well, say if you want to connect your Android to your TV via HDMI and in that case, a Wireless Mouse and Keyboard will definitely gonna help you quickly navigate your Android device. On mouse when you Right Click, it will navigate you one step back, in other words, Right Mouse Click acts as a Back navigation Button. Then there are these shortcuts like CTRL+C or V to copy and paste, Alt+Tab to switch between apps quickly just like in Windows. And I think these reasons are probably good enough to use a wireless mouse and keyboard on an Android device, What you think? Comment below.Connecta Mouse or Keyboard with Android via OTG

    Connect a USB Soundbar Speaker to Android

    Nowadays, people use portable Bluetooth Wireless Speakers but did you know that Your Android device also supports USB Speakers? You can connect any USB Speaker to your Android device and listen to your Favorite music as long as your Android in ON. I have this old Philips USB Soundbar I purchased 6 years back and this works so well. Sound quality is just great, similar to when connected to a PC or laptop.Connecta USB Soundbar with Android

    But the best thing about this USB Soundbar is that it consumes very less battery power, which is something I didn’t expect at all. I thought my device battery won’t last for long but when I played music for 13 minutes, it consumed 2% battery only and that is really impressive. All you need is an OTG cable or adapter and just plug and play. You don’t need any extra app to enable USB Soundbar.


    Besides this, you can also use your Android OTG to print, connect the internet via Ethernet or Lan and transfer data to external storage devices and vice versa. If you know any interesting way to use OTG, please share with us and also let me know what you think about this video. Subscribe to our Channel for more such videos and Hit like if you liked this video. I will be back with another interesting Video post Soon. Thanks for watching have a Wonderful time.